ASVIC - Engineering & Software
VIEW CART
SEARCH
 

 How to Install & Use Mech-Q

 
  We strongly recommend that you print these instructions and follow them carefully.
 
  Installing Mech-Q  
 

 

  1. EXIT AutoCAD (or IntelliCAD)

  2. Use Windows Explorer - locate the downloaded file then double click on it to start the program Setup.

    • If you can't find the file, click the Windows Start menu and select Search (or "Find") then search for the file name: "MQ*.exe".

    • When the Mech-Q Setup file is located, double click on it to begin the installation process

  3. Follow the instructions in the splash screens.

 

Special Instructions (Before installing Mech-Q)

Windows VISTA Windows 7

The "Use Account Control" (UAC) must be turned OFF:

1) Exit all programs
2) Use CONTROL PANEL >> User Accounts
3) Turn User Account Control (UAC) - OFF
4) Keep the UAC - off.

The User Account Control (UAC) must be turned OFF:

1) Exit all programs
2) Use CONTROL PANEL >> User Accounts >> Change User Account Control Settings
3) Change the setting to: "Never Notify"
4) Now install Mech-Q.
5) Keep the setting at: "Never Notify".
 
     
 

Using Mech-Q

 
 


To use Mech-Q successfully you need to follow a few simple steps. These steps vary according to the version of Mech-Q you are using.  Please follow the instructions below - corresponding the AutoCAD, AutoCAD LT or IntelliCAD version that you have.

 
 

MECH-Q for  AutoCAD 14-2010

 
 


After you have installed Mech-Q on your hard drive:

Start AutoCAD in the normal fashion. If the Mech-Q was installed correctly, you will note that the Mech-Q menu (Pop-up and Toolbars) is now added to your existing menu. Use the Mech-Q menu (toolbars or drop-down menu) to access the Mech-Q functions

NOTE
For AutoCAD 2009 (and later version), The Mech-Q drop-down menu will be located under the AutoCAD "A" menu

 

 
 

Special Note:  MECH-Q for  AutoCAD 2006-10

 
 
In most cases the installation & setup of Mech-Q for AutoCAD 2006-9 will not require any other than those noted above. However, in some rare cases the Mech-Q menu might fail to load.  If this happens, after you install Mech-Q - the first time you start AutoCAD type the following command at the AutoCAD Command prompt:

(load "MQSetupA") 

This step should only be required once (and only in rare cases of AutoCAD install setup) 

If Mech-Q is not working or the Mech-Q Menu is not automatically loaded - Please follow the "Manually Loading Mech-Q" instructions

 

 
 

Using MECH-Q for AutoCAD LT2000-LT2010
(with LT Toolkit Lisp Enabler)

 
 


After you have installed Mech-Q on your hard drive:

Mech-Q for AutoCAD LT2000-10 requires a Lisp Enabler to work. The Mech-Q installation will also install the Lisp Enabler:

To use Mech-Q or other Lisp based utilities - you must start AutoCAD LT2000-10 - by using the Mech-Q launch icon ("M"). This icon will be created on your desktop during the Mech-Q setup.

LT Toolkit (Lisp Enabler) Serial Number/Auth. Code

When you start Mech-Q/AutoCAD LT for the first time - The "Authorization Wizard" dialogue will be displayed - Please enter the Serial Number & Authorization Code provided - this will activate the lisp enabler and therefore Mech-Q.

The LT Toolkit serial number and authorization code will be sent to you either by email or with the software CD when you download a Mech-Q demo or when you purchase.

If the Mech-Q was installed correctly, you will note that the Mech-Q menu (Pop-up and Toolbars) will now be added to your existing menu. Use the Mech-Q menu (toolbars or drop-down menu) to access the Mech-Q functions.

If Mech-Q is not working or the Mech-Q Menu is not automatically loaded - Please follow the "Manually Loading Mech-Q" instructions

 
 

Using MECH-Q for IntelliCAD (and CADian/Bricscad/ZWCAD)

 
 


Important Note:
The install folder for Mech-Q IntelliCAD (or CADian/Bricscad/ZWCAD) must be the same as the IntelliCAD main install folder (Same location as ICAD.EXE, Bricscad.exe or ZWCAD.exe)

After you have installed Mech-Q on your hard drive:

Start IntelliCAD in the normal fashion. If the Mech-Q was installed correctly, you will note that the Mech-Q menu (Pop-up and Toolbars) is now added to your existing menu. Use the Mech-Q menu (toolbars or drop-down menu) to access the Mech-Q functions

 

 
 

Manually Loading Mech-Q

 
 
Follow the following steps to manually load the Mech-q menu:

Start AutoCAD (or  the Mech-Q Start-up icon for AutoCAD LT versions)

A) Adding Mech-Q to the AutoCAD search Path

         Check that the installer has added Mech-Q to the AutoCAD search path:


1. From the >> "Tools" menu select "Options"
    [ AutoCAD "A" menu  AutoCAD 2009+]
2. Select the "Files" tab
3. Select "Support Files Search Path" 

Check to see that the Mech-Q install location is found in the AutoCAD search path.
If NOT...

3A) Use the "Add" button to add Mech-Q install location to the AutoCAD search path 

default location
AutoCAD: C:\Program Files\Mech-Q\A20??
AutoCAD LT: C:\Program Files\Mech-Q
IntelliCAD:  [Intellicad install location]\Mech-Q
                 (for example: C:\Program Files\CADian 2008\Mech-Q)

4. Use the "Apply" button & then "Close"

B) Load the MECH-Q menu


1. From the AutoCAD  menu (or "A" menu) "Tools" menu select "Customize" then "Customize Interface"

2. Make sure that you are in the "Customize" page and from the "All Customization Files" list select "Open"

3. Locate the Mech-Q customized user interface file: Mech-Q.CUI (found in the Mech-Q Install folder)

Default Install location: 
   AutoCAD 20XX:             C:\Program Files\Mech-Q\A20XX
   AutoCAD LT 200XX      C:\Program Files\Mech-Q\20XX\Menu
 
  


4. Use the "Open" tab to load the Mech-Q menu.

This should load the Mech-Q menu.

 

 
 

Authorizing Mech-Q

 
 
(Not applicable to Network/Site licenses)

When you first run Mech-Q, the software will generate an Application Serial Number. The Serial Number must then be sent to ASVIC Engineering & Software - ASVIC will then process and forward to you the Authorization Key.

You can get the Application Serial Number by using either:

  • Mech-Q Start-up dialogue or
  • About Mech-Q from the Mech-Q menu or
  • Authorize Mech-Q  from the Mech-Q "Maintenance" menu

To apply for an Authorization Key please click here:

Using the Authorization Key Code:

  1. From the MECH-Q pull down menu - Select MECH-Q Register
  2. Enter the Authorization Key code EXACTLY as received (Case sensitive).
  3. Select the OK tab.
If the Code entered is correct - MECH-Q registration will be accepted.
 
 

Mech-Q - Network Version

 
 
The Mech-Q demo version is NOT suitable for network installations = A special build of Mech-Q is required for using in a  network environment - Please contact ASVIC is you require more information.

Contact ASVIC for Mech-Q Network Version install instructions

 
     

 

HOME
PRODUCTS
Free DEMO
SUPPORT
CONTACT US
PARTNERS
USERS & TESTIMONIALS
FAQs
RUN-TIME DEMO
LITERATURE & TUTORIALS
PRICE REQUEST
UPGRADE REQUEST
AUTHORISATION KEYS
ABOUT US
View Cart
My Profile

Mech-Q CAD Solutions
AutoCAD LT
CADian Advanced CAD
Plate 'n' Sheet
CustomAir Ducting
LT Tools