Plate 'n' Sheet Upgrade plus Maintenance
Current Version: v4.12.12
Plate ‘n’ Sheet Upgrade plus 12 months Service & Maintenance Extension
Get the latest Plate 'n' Sheet version plus free updates within Version 4
See "Details" tab for history of what's changed.
Do not have Plate 'n' Sheet v4 - Click Here for more details
No reviews exist for this item
Latest Release - Changes Log
'4.12.11 (17/05/18) Geneneral update and consolidation of revisions, including:
'Added the Pierce_Style to Pns4.opt tblLapJoin. 0= Nil piercing, 1=short line in DXF, 2=small circle in DXF. Can only be set in the opt file and so that I don't have to recompile to change it.
'Modified Taglio email address to: "Email: firstname.lastname@example.org"
'Modified frmAuthorise so that the Key type is displayed in a label
'and 'No Of Days' is displayed only when there is an Interim Key with a time limit. Hidden when the is a permanent key.
'4.12.03 (21/02/18) Pipe Truncated By a Plate allows rotation of seam ( .JoinAngleEnable = True)
'4.12.02 (19/02/18) Removed the LapLists from the CSurface.HalfPattern as these are incorrect for the end laps (lapList3 & 4).
'It were causing a problem with Segmented bends, brought to attention by AISMF who use half patterns and piercing.
'4.12.01 (26/02/18) A major upgrade to Material Editor because of issues when entering the materials and options.MaterialUnits is set to "Inches".
'4.11.09 (20/12/17) A runtime error 75 message during startup was displaying "Lampshade Design V4" in the title of the msgbox instead of Plate 'n' Sheet V4".
'The Project properties page was modified as it was set to Lampshade for
'4.11.08 (06/10/17) Request by Colin's client. 'Modified Branch Boots. Special properties not working and the button is now disabled. 'Seam fixed to 180 deg so Join is on the opposite (shortest) side.
'4.11.07 (04/07/17) 'Added a Transition, fshp_Transition_Ellipse_To_Rectangle_AngleTop_Base. At request of Sicam as it was in the V3 library of shapes.
'4.11.06 (01/06/17) 'Modified Aspects address details.
'4.11.05 (24/01/17) 'Added another shape "Branch_Rectangle_To_Flat_Boot". Special shapes for a client of Colins.
'Added another case (13) to CShp_Rectangle_to_Rectangle to get a seam at 180 degrees.
'4.11.04 (12/01/17) 'Added another shape "Branch_Rectangle_To_Pipe_Boot". Special shapes for a client of Colins.
‘Added another shape “Branch_Cone_To_Pipe_Reverse_CL_Branch”. T It forms a Reverse Cone into a pipe.
‘Where the cone diameter is larger than the Trunk pipe and finishes on the centerline.
‘Also added a variable and setting to mdlMainModule to control display of piercing, as follows:
‘Public PiercingOption As Integer ‘Set in Sub Main (0 = No Piercing, 1 = Piercing as short line, 2 = Piercing as small circle)
‘Enhanced Piercing options for AISMF: Set Distance and number of holes in Lap Form. Holes are written to DXF as circles.
‘Will need an option to allow swap between circle and short line (previously)
‘Added two Pipe Boots. Special shapes.
‘Change to Armadillo only. Added another key to limit number copies open. This is because of running it from a central server with multiple clients.
‘Client with 40 clients on a Citrix Server. Limits the number of copies on other keys also in time.
‘Bug fix to Pipe to Cone for Cab Construction. Was producing two half patterns for Cone with angle and horizontal pipe (Cone only and Both options).
‘I removed the half pattern option and now rotate the pipe instead of rotating the seam to simplify code
‘Change of Address for Asvic. Added “About” button to Licencing form.
‘Bug fix to CDXF. When region/language formatting etc set to Dutch,if DXF out “all entities”. Similr to problem below affecting the DXF of aligned dimensions.
‘Bug fix to CDXF. When region/language formatting etc set to Dutch,if DXF out “all entities” including bend angles, and other auto dimensions the
‘DXF Group code 50 (text alignment angle) was formatted with a comma as decimal separator. I used the FormatNumber function to format the
‘text alignment angle going into the DXF so it has a full stop.
‘Bug fix to transition options. When a rect to Round was split on the corner and 12 or 36 press lines were selected,
‘the Press Angles would be incorrect. I removed 36 and replaced it with 32 and 40 from the drop down list. ‘I added a msgbox to SpecialOptions_Transitions when 12 press lines AND join on corners was selected.
‘Bug fix to Branch Cone to Cone. The Min Branch Length on the forms was calculated incorrectly.
‘Bug fix to Materials Editor. Rain heads added. Rectangular ducts added.
‘Bug fix to Branch Segmented pipe for PowerRun.
‘Deregister Log File now prompts for a file location, rather than saving to the application folder.
‘More modifications for the French version – also replace Akteis logo.
‘More modifications for the French version – Mostly to Pns4.stg database.
‘More modifications for the French version. Hidden General help as no translation. Updated disclaimer strings.
‘More modifications for the French version.
‘Modifications for the French version.
‘Bug fix in CDXF where it was exporting the laps incorrectly.
‘fshp_Branch_Pipe_to_Cone_Angle_Both modified. The pipe diameter was not being compensated to mean thickness.
‘Modifications for French version and difficulties creating installation package.
‘Add Piercing option to LapJoin function for Total Insulation.
‘Fixed issue with Segmented bend Extended. Laps (No Notching) was crashing sometimes.
‘Problem was in the function mdlMathModule.IsOnLine. Sometimes the angle was 360, sometimes 0. ‘Modified function to test for 360 and reset angle to 0.0 before test for equal.
‘Modify Sicam Logo. New Installshield (2013).
‘fshp_Branch_PipeToCone_Angle_Cone and CShp_Branch_PipeToCone. Added option buttons to provide 90 degree join to cone. Also option
‘to split cone into two halves only if 90 degree option has been selected so that joincannot run through hole.
‘Requested by CAB Construction (Tim Austad).
‘fshp_Error checking added to fshp_Branch_Branch_Pipe_To_Pipe_90_Gussetted.
‘fshp_Duct_Rect_Bend_Angle modified to prevent radius less than half width of duct.
‘Begin phase out of dongle version.
‘eVersion and Hasp Version now identified on frmMain caption and frmAbout forms ‘Hasp is only tested if Armadillo KEYTYPE=HASP.
‘Website downloads are now to be only eVersion (Armadillo) to stop emulator activity.
‘Modify Branch_Pipe_TO_Pipe_Gussetted to allow selection of both / Upper / Lower gussets. I had to remove the offset option
‘to do this.
‘Auto Step-Off dimensions were being written upsidedown. Modified CDimension.drawMe so that Case StepOffTopDimension and
‘case StepOffBaseDimension call DrawDimText function with parameter “True”, so that text will always be oriented upright.
‘Updated Intellicad functions to suit V7.2.
‘Added variable pipe lengths to 3 pipe breech (CShp_Breech). ‘Added Dropdown list “Select Item to Unfold” to 3-Pipe breech only. ‘I may hide this until V5 released.
‘Added Pipe to Cone Angle Both.
‘Added Pipe to Cone Angle Both.
‘Updated Asvic logo and contact details.
‘Fix issue with Rainhead rectangular. Drain plate was reverse orientation relative to funnel. Added option button to allow the base to be displayed separately.
‘Modify Branch Reinforcing ring to improve allowance for thickness: CShp_Reinforcing_Ring_Cone and CShp_Reinforcing_Ring_RightCylinder
‘Further modifications to send to MerryMech.
‘Further modifications to send to MerryMech.
‘Modifications to send to MerryMech.
‘Special transition Round to half round .
‘Added JayMac details to about box. Opt number = 322.
‘Modified Asvic phone / Fax numbers in “About” screen. Grey-out Half Pattern option for the oblique cones as it wasn’t
‘working. Also oblique cones has a special options buttons to divide up into any number of equal segments.
‘A special Offset pipe branch added. Form fshp_Branch_PipeToPipe_Offset
‘and Class CShp_Branch_PipeToPipe_Offset. One side of the pipe branch is outside of the trunk pipe. Like tangent branch but over further.
‘Oblique Cylinder_Angle had a restriction on angles less than 180. It should have restricted angles >= 180 to keep them between 0 and 180.
‘Changed “Site-Code” to “Computer ID”. Also some string changes where it was refering to “AutoCAD” instead of “IntelliCAD”.
‘Further Mod to CShp_Branch_Segmented_Pipe. Error checking on BendCLRadius to ensure larger than Bend Radius.
‘Mods to Ducting 1 shapes as suggested, especially problem with laps.
‘I added a new shape Duct_Rect_Offset_2. This duct has different height ends and can be offset in both directions.
‘Modified CShp_Branch_Segmented_Pipe. It was adding “pointy bits” when the last segment
‘was cut by the main pipe. Modified Function FindOppositePoint. Also modified other functiuons and
‘additional documentation of code.
‘Also modified mdlMathModule.AreaOfTriangle to cater for if one side is equal to the sum of the other two sides.
‘Added new shape: Duct_Rect_Offset_Double as requested by customer.
‘Modified Oblique Cylinder due to a problem with half pattern. It was using CShpRoundToRound ‘which put diagonals on each pressline and caused the problem with half patterns.
‘I made a new class CShp_ObliqueCylinder to simplify it. It also corrects the problem of the half ‘pattern tilting over as the list2 aligned itself.
‘Modified fshp_Duct_Rect_Branch_90 and Modified fshp_Duct_Rect_Branch_Split to remove ‘restriction on duct height. It shouldn’t have been there anyway.
‘Added fshp_Rainhead_Rectangular_Tapered_1. Cockeral Sheetmetal.
‘Addition of the CAD International Logo and details to the ‘About’ page.
‘Addition of the Pastubo shape. ‘Not compiled or issued yet‘4.09.05 160410
‘Reinforcing Ring (Compensating Plate) now allows offset pipe branch on 90 deg branch.
‘Required changes to CShp_ReinforcingRing_Right_Cylinder and fshp_Misc_Branch_Reinforcing_90 files.
‘On importing a mesh from IntelliCAD, a msgbox was popping up and displaying the M x N mesh size.
‘Mod to CTransition because it wasn’t working with only two points in each list. This came to light with the
‘triangular pieces in a Bellis 8-part transition (SeamAlignment=81). Modified the CShp_RectangleToRound_Multi to allow
‘the 8 part transition. This also meant modifying the CShp_RectangleToRectangle.
‘Transitions Oval to Round and Oval To Oval were failing when the Join Option “One Part on Flat” was selected. This is
‘Integer 11 and wasn’t provided for in the CShp_RectangleToRectangle.SetSeamAlignment function.
‘Project Info wasn’t being transfered to AutoCAD, IntelliCAD or DXF. Bend Angles now have brackets and a “d” to distinguish
‘them from true lengths.
‘Send to IntelliCAD and Select Mesh from IntelliCAD added and sent to Trevor to test.
‘Error in fshp_Rectangle_To_Round_Angle_Top. Fix a problem with negative angle top. I think this is a problem when the
‘tangent points are found.
‘Error in CShp_Prism. The Baselength was using the circumference of the base circle not the point-to-point distance around the polygon.
‘This meant that the base length of the pattern was incorrect although the model was OK. ‘I replaced the DevelopPattern calculation with a CTriangulation.
‘Segmented Bends. Added Join Angle options to the frmSpecialProperties_SegmentedBends dialog. Allows the seams to be rotated
‘to an angle relative to the seam position icon in the special properties dialog. Applies to parallel and tapered only (not Ovals).
‘fshp_Branch_Pipe_To_Pipe_90_Both and fshp_Branch_Pipe_To_Pipe_Angle_Both added to program.
‘Compensating Plate (reinforcing ring) pipe to pipe branch re modelled to get a uniform width around the pipe.
‘Added angle option.
Plate 'n' Sheet Upgrade plus Maintenance
Monthly / Yearly Subscriptions Available
Please choose your product to see optionsFind out more
For Quantities of 3 or more please contact us